When planning to set up your water treatment plant, it is important to consider the type of filtration method you need to opt for. While technology has made it possible for plant owners to try out a range of options, to date, the most efficient one is reverse osmosis. Therefore, when you set up the plantas piloto de tratamiento de agua, it is important to have the best and most efficient water treatment methodology in place.
RO system isn’t just useful in terms of efficiency but also aids the environment. The Reverse Osmosis process helps reduce the hazardous waste generated in the process of cleaning the wastewater. In addition, the process doesn’t require the use of any hazardous chemicals during the filtration process that permeates pure water.
The RO process functions as a green solution meant for in-depth filtration of industrial wastewater. One more way the RO treatment facilities invest in efficiency is by integrated capturing & correct waste disposal that diverts the impurities within its prime water feed tubes. This is done without actually discharging any of the harmful chemicals that are present in the saturated water that goes to the drain or effluent. So, this is why most industry owners opt for RO-based plantas piloto de tratamiento de agua.
The cutting-edge membranes used in the RO system help remove the impurities with no need to make use of any type of resins, chemicals, or even exchange beds for the ions present in the contaminated water. As the chemical-based wastewater filtration systems wear out, the disposal and removal of the exchange beds and resins tend to have a major environmental impact as compared to the RO membrane system.
The concentrated impurities that are obtained from a reverse osmosis system can easily be discharged into the drain without any need for costly and effluent water treatment processes.
Prices for generic filtration systems such as caustic soda or acid are rising at a staggering rate. In contrast, the price for using the RO process & membrane elements seem to have decreased a lot in the past few years while the technology has evolved so much.
The only major cost involved in implementing the use of a RO system for your plantas piloto tratamiento de agua is the electricity required. But that is about it, and there are no extra expenses that come in the way or increase your overall expenditure. Modern-day water filtration systems such as RO are designed to consume a minimum amount of energy in terms of operating costs and can directly be installed in the factory as and when needed. You can connect the system directly to your production line and use it as and when required. The wastewater streams, when passed through the RO systems, can aid in the reduction of the disposal costs while being reused again in the process.
When using RO filtration for your plantas piloto tratamiento de agua, you can get access to several safety and health benefits that help produce top-notch and high-quality water with no harmful chemicals needed. The traditional exchange system for ions makes use of resin-based filters that tend to pack in highly dangerous alkalis and acids that could be a major disaster for the environment and even tend to cost a lot.
The RO system helps replace your conventional filtration processes, such as chemical treatment. They also pack in smaller and highly efficient equipment to ensure that it takes up less space. Doing this helps eliminate the risks that come from manual handling & hazardous on-site chemicals that might threaten the nearby area. It also provides access to a safer environment for the factory workers to work in.
An RO system also ensures that you do not have to invest a lot in terms of maintenance. This is due to the fact that it functions as a self-contained filtration unit. The best thing about it is the fact that it tends to self-clean and even requires minimum time to operate. It simply requires monitoring on a daily basis from the dedicated on-site personnel as opposed to being maintained on an active basis.
This, in turn, helps maintain the productivity level with very limited downtime required. Plus, changing the system’s pre-filters is particularly ergonomically friendly & can be done within minutes. Additionally, the membranes in an RO system can last about 2 to 3 years while keeping in mind a range of factors like quantity or quality of the feed water.
Almost 100 percent of the membranes that are present within the system can easily be replaced in hours when compared to the resin-based waste-water filtration systems that could take up days. The membrane can also provide the user’s access to a comprehensive maintenance and service package alongside an integrated finance solution that suits their needs.
Simply put, RO systems are great when it comes to keeping your overall production cost down low. Moreover, it doesn’t affect the environment when compared to traditional wastewater cleaning methods. The key is to keep upgrading your existing systems with new technologies to ensure the system adheres to its effectiveness with time. So, the next time you plan on reducing the cost of wastewater filtration in your plantas piloto tratamiento de agua, make sure you consider upgrading to a RO system.
With so many advantages & benefits of using an RO system, you can be assured that the overall cost required would go down to the maximum possible number. In the years to come, the cost for RO is bound to come down a lot more. It brings in minimum risk to the staff, ensures cost-effectiveness, environmental friendliness, and lastly, efficiency.
Are you looking for an efficient team to help set up your plantas piloto tratamiento de agua in a jiffy? Well, look no more! Keiken Engineering brings you a top-notch team with solutions that help enhance your water treatment efficiency while keeping the cost down low. To know more about our services, you can give us a quick call at +34-91-057-7254 or write to us at firstname.lastname@example.org