Being a very powerful adsorbent, activated carbon is commonly used for water filtration for removing undesirable components and contaminants. Apart from water filtration, this substance is also used for 1,000 other applications. Right from water purification to gold-mining, activated carbon is customized to fulfill a variety of needs.
Did you know carbon filters have the capacity to remove 81 chemicals and reduce around 52 chemicals from water? Well, this is something that no other filter media will be able to do. Apart from that, it’s also capable of removing 14 pesticides, 12 herbicides (identified), and 32 organic contaminants (identified).
Be it the filtration of commercial and industrial wastewater or odor/air issues;Carbon active para tratamiento de aguais prevalently used. And the reason behind carbon being an amazing adsorbent is it’s extremely porous and has a wider surface area for absorbing contaminants.
For water filtration, there are mainly two types of activated carbon that are used for water filtration. One is Granular activated carbon (GAC), and the other is Powdered activated carbon (PAC). Now let’s understand in detail how both the activated carbons are made.
In the field of environmental management, carbon active para tratamiento de aguais widely popular. However, when one considers the ability to remove unwanted substances, there are various differences among carbon products. There are a lot of factors that influence the quality of activated carbon. Therefore, it’s important to verify the quality before opting for it.
To determine its capacity to remove unwanted substances or contaminants, one should look beyond its volume or weight. Another way to determine its ability is by considering its Adsorption capacity. This capacity is referred to as the volume of impurities sucked out by a particular amount of activated carbon. Therefore, the higher the adsorption capacity, the better will be the results.
For the manufacturing of carbon active para tratamiento de agua, various quality specifications and different raw materials are used. With reactivated carbon, quality is an issue. Proper operation and careful & close monitoring determine the ability of reactive carbon to decontaminate the untreated or wastewater. Also, point to be noted, the adsorption capacity is based on a careful and precisely regulated process of steam activation.
So, two stringent tests have been developed by the ASTM and carbon manufacturing industry that predicts the cost-effectiveness along with measuring the reactivated and virgin carbon products. They are:
Apart from the above-mentioned tests, there is another important test that measures the efficiency of removing chlorine. Though the presence of chlorine in water isn’t harmful to health, it still needs to be eliminated as it can change the odor and taste of water. Carbons are evaluated depending upon the half-life length dichlorination. In this process, the amount of carbon needed to remove the chlorine content is measured, which is from 5 ppm to 3.5 ppm. For superior performance, a lower length of half-value is preferable.
Hence, whenever you’re headed to buy either the reactivated or virgin carbon products, confirm that the above-mentioned adsorption numbers or characteristics are mentioned. After that, make sure to compare them to the CARBTROL’s so that you get the best carbon active para tratamiento de agua.
Except for activated carbon, no other filter is strong and effective enough to remove every contaminant from it. If you start talking about the versatility of activated carbon, it is going to take ages to complete.Apart from making it drinkable, carbon filters also make sure that they do not strip the water of profitable compounds such as minerals from it. Also, it’s necessary to select the right carbon filter possessing the right characteristics of carbon active para tratamiento de agua. So, before you embark on a mission to get an activated water filtration, make sure you consult an expert who will direct you towards the correct path. There are various agencies right at your disposal that offer such services. So, make sure you consult the right agency and get the best advice for setting up a filter for water treatment.
Looking for advice or products from a reliable agency? Well, why panic when Keiken Engineering is here? Whether you need a proper estimation of your industry or you want to buy products from us, we will always try out best to live up to your expectations. Our team holds expertise and experience when it comes to solutions related to water treatment. Our products and services are tailored to provide you with energy-efficient and professional solutions. So, if you’re not sure what to choose when it comes to carbon active para tratamiento de agua, you can rely on us for advice/products. If you’ve got further queries, you can contact us via mail at infor@keiken.es or pay a visit to our head offices, which are situated in Madrid and Barcelona. Also, you can call us at +34910577254 (Madrid) or +34936811650 (Barcelona).